AGDS-V Four Channel Gas Detection System
The AGDS-V is a four channel gas detection system designed for use in boiler houses, plant rooms and areas with a risk of gas escape or build up.
Four channel gas detection system
The AGDS-V is a four channel gas detection system designed for use in boiler houses, plant rooms and areas with a risk of gas escape or build up.
Auto isolate/close
In the event of a high alarm from one of the sensors, the AGDS-V will isolate/close any connected solenoid valve.
A low alarm indication is given on the control panel including ‘Mute’, ‘Reset’ and Emergency Stop buttons. Remote emergency stop buttons and thermal links can be monitored and there is also a fire alarm input which will close the gas valve when activated. There are two change over mains rated relays which can be used to activate a beacon/sounder, a fan or signal to a BMS system.
Product Features
- Compact
- 1 to 4 detectors
- Five different gas detector types
- Simple to install
- Two settable mains rated relays
- Clear OLED display
- Two settable mains rated relays for BMS
- Beacon or fan activation
- Low Alarm
- High Alarm
- Emergency Stop
- Gas On/Off
- Fire Panel Activated
- Detector Fault
- Generic Alarm
AGDS-V Four Channel Gas Detection System
Product Dimensions
180mm x 130mm x 60mm
Gas Detection
The panel can except a maximum of four detectors. The current range is:
Methane/Natural Gas (CH4), Propane (C3H8), Carbon Monoxide (CO), Carbon Dioxide (CO2) and Oxygen (O2) Depletion.
Alarm Types
Fixed low and high alarm peak levels, high alarm activation will latch and isolate the connected gas valve.
Peak Alarms
Methane/Natural Gas (CH4) & Propane (C3H8)
- 5% Low alarm
- 10% High alarm
Carbon Monoxide (CO)
- 20PPM Low Alarm
- 30PPM High Alarm
Carbon Dioxide (CO2)
- 2800PPM
- 5000PPM
Carbon Dioxide (CO2) – High Mode Selectable by Sensor
- 5000PPM
- 10000PPM
Oxygen (O2) Depletion
- 19.5% Pre Alarm
- 18% Full Alarm
AGDS-V Four Channel Gas Detection System Manuals and Standards
Product and Installation Guides
Related Standards
AGDS-V Four Channel Gas Detection System Warranty and Service
All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.
Why not let us commission your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.
Service
The panel and sensors must be re-commissioned and tested every 12 months as a minimum but with consideration of every 6 months dependant on gas type and environment. Medem offers cost-effective yearly service plan options which include detector exchange to assist in service budgeting
AGDS-V Four Channel Gas Detection System Image Gallery
Related Products
AGDS-4 4 channel Gas Detection System with Valve Control
- Designed for Gas Detection
- 4 Channel Gas detection system
- Valve isolation
SafeSpace V Gas Detection System with Valve Isolation
- Designed for Gas Detection and Monitoring
- Valve isolation
SEC-B v4 Boiler Room Gas Pressure Proving System
- Designed for Gas Detection
- Combined gas detection and pressure proving system
- Automatically resets after a power failure or fire alarm
- Reduces the potential for site down time and frozen pipes
Product not found.