SEC-L v5 Gas Proving and Interlock System for Laboratory Service Control

The SEC-L is a multi-function solution designed for the laboratory.

The SEC-L v5 is a gas pressure proving and gas detection system with options for electric and water isolation plus ventilation interlocking.

Providing the operator individual control of the gas, water and bench electric supplies. The system will perform a down stream integrity check ensuring gas tightness before use, close the gas solenoid valve in the event of a high-level gas alarm, low incoming gas pressure or if the emergency stop/fire alarm is activated.

It is designed for use primarily in education laboratories.

Gas Pressure Proving

Using our patented differential pressure proving method the system checks the gas pipework and outlets in a classroom for gas leaks. Able to test a variety of gas delivery lines including oxygen up to 10bar It also monitors for low pressure and overpressure without opening the solenoid valve, making it the only truly safe method of proving available.

see Why choose Medem differential pressure proving?

Gas Detection

Up to 16 gas detectors can be connected to the system, low level alerts will cause a audible tone and visual message on screen, high level alerts will additionally isolate the gas supply.

For Carbon monoxide, the system can monitor the CO2 levels and temperature to control area ventilation in the laboratory when fitted with appropriate sensors.

Where the CO2 level rises above prescribed limits, the system can isolate a gas supply to help meet the updated BB101 and IGEM/UP11, edition 3. The limit is variable to accommodate for current legislation and guidance.

Remote Indications

All system states and alerts can be remotely monitored and indicated via our “BMS” relays. There are five potential free relays each of which can configured separately.

Product Features

Gas Pressure Proving
Gas detection (1-16 detectors)
Electrical & Water Isolation
Fan interlocking
Carbon Dioxide Level Monitoring
Demand Controlled Ventilation
Auto restart on power failure
Event log

Auto restart on fire alarm
Fire test isolation mode
Two settable SELV relays
Low and high incoming gas pressure monitoring alerts
Engineer functions
Over Pressure Alert

Gas Detectors

The panel can monitor up to 6 detectors directly and up to 16 when installed with an AD-PP power pack. The current range is:

Click here to find out more about our product warranty

A guide to our method of gas pressure proving.

SEC-L v5 Gas Proving and Interlock System for Laboratory Services

Specifications

Power	230 VAC – 3 amp fused spur.
Product Dimensions	255mm x 180mm x 80mm
Weight	1.4kg
Temperature Range	-5° to 55°C.
Humidity	20% to 90%RH Non-Condensing.
Ingress Protection	IP64
Housing Material	ABS Plastic
Colour	Grey
Mounting	Wall Mount
Sensors	Pellistor, Toxic, Oxygen, NDIR.
Outputs & Connections	1x 16 channel VNOM power & sensor data .
	2x Potential free change over relays. (Mains rated)
	3x Potential free change over relays. (SLEV)
	1x 12volt supply rails.
	1x Sender unit (2core low voltage).
	1x 0-10v fan speed.
	1x Remote emergency stop N/C.
	1x Fire Alarm N/C.
	2x Fan PD switches.

Alarm Types

Fixed low and high alarm peak levels, high alarm activation will latch and isolate the connected gas valve.

Peak Alarms

Methane/Natural Gas (CH₄) & Propane (C₃H₈)

5% Low alarm
10% High alarm

Carbon Monoxide (CO)

20PPM Low Alarm
30PPM High Alarm

Carbon Dioxide (CO₂) – Selectable

1500PPM
2200PPM
2800PPM
4000PPM
5000PPM

Oxygen (O₂) Depletion

19.5% Pre Alarm
18% Full Alarm

SEC-L v5 Gas Proving and Interlock System for Laboratory Services Manuals and Standards

Product and Installation Guides

SEC-L v5 Product and Installation Guide

SEC-L v5 Data Sheet

Related Standards

IGEM/UP/11 Edition 3, Gas installations for educational establishments

Building Bulletin 80, Science Accommodation in Secondary Schools

SEC-L v5 Gas Proving and Interlock System for Laboratory Services Warranty and Service

All our products come with a 5-year warranty

Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.

This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us commission your system and receive a 10-year Warranty?

Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

Service

The panel and sensors must be re-commissioned and tested every 12 months as a minimum but with consideration of every 6 months dependant on gas type and environment. Medem offers cost-effective yearly service plan options which include detector exchange to assist in service budgeting.