Oxygen (O2) Archives - Medem UK Ltd. https://medem.co.uk/product-tag/oxygen-o2-detection/ Leading supplier and Manufacturer of Gas Detection equipment. Thu, 26 Jan 2023 14:55:12 +0000 en-GB hourly 1 https://wordpress.org/?v=6.4.3 https://medem.co.uk/wp-content/uploads/2018/10/cropped-Favacon-1-32x32.png Oxygen (O2) Archives - Medem UK Ltd. https://medem.co.uk/product-tag/oxygen-o2-detection/ 32 32 Pro-Elite https://medem.co.uk/product/pro-elite/ Tue, 16 Mar 2021 08:17:44 +0000 https://medem.co.uk/?post_type=product&p=38077 The Pro-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Universities, multi-room gas monitoring, car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the Pro-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The Pro-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

The post Pro-Elite appeared first on Medem UK Ltd..

]]>
< Modular <
> Programmable <
> 1 to 32 detectors <
> Multiple different gas types <
> Optional Battery Backup <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ Pro-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post Pro-Elite appeared first on Medem UK Ltd..

]]> AGDS-MCM v2 https://medem.co.uk/product/agds-mcm-v2/ Wed, 17 Apr 2019 17:12:27 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=1702 The AGDS-MCM is a multi-channel gas monitoring system designed for use in areas of potential gas escape and build-up.

Six Medem detectors can be connected (16 with a power pack) for the detection of natural gas, LPG, or carbon monoxide, carbon dioxide and oxygen depletion.
In the event of a high alarm from one of the detectors, the system can activate a relay, beacon or sounder. Low alarm indication is also given.

Even with the system switched off it can still be used to monitor for carbon monoxide and carbon dioxide via its 0-10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or switch ventilation on via a relay.

The OLED will display appropriate information about alarm situations and detector status.

There are multiple relays which can be used to control remote indications, connect to a BMS system or activate a fan.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-MCM v2 appeared first on Medem UK Ltd..

]]> > 1 to 16 detectors <
> Five different gas types <
> Multiple Relay signalling options <
> Clear OLED display <
> Fan Interlock <

Settable mains and SELV rated relays for BMS, beacon or fan activation from one of the following statuses:
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-MCM | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-MCM v2 appeared first on Medem UK Ltd..

]]> AGDS-elite https://medem.co.uk/product/agds-elite/ Fri, 08 Feb 2019 12:03:42 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=699 The AGDS-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors (with the use of extension panels) for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the AGDS-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The AGDS-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

Download the catalogue:


⤓ AGDS-elite | Short Catalogue

 

 

The post AGDS-elite appeared first on Medem UK Ltd..

]]> > Modular <
> Programmable <
> 1 to 32 detectors <
> Eleven different gas types <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (90 days of detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel and each extender (one per panel). Each relay panel had eight programmable relays.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ AGDS-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post AGDS-elite appeared first on Medem UK Ltd..

]]>