Propane/LPG (C3H8) Detector
Propane is a colourless gas which is heavier than air gas and will therefore sink and stay at a low level when released to the atmosphere.
Propane is a colourless gas which is heavier than air gas and will therefore sink and stay at a low level when released to the atmosphere.
Detector location should be at lower levels (approx 20 cm to 30cm from the floor).
Detectors are set to alert at a pre-alarm level of 5% LEL and high-alarm of 10% LEL.
Propane is a colourless, flammable heavier than air gas.
Propane is commonly used as a fuel and is one of a group of liquefied petroleum gases.
See our Gas Detection Pages for more information
Product Features
- Gas detector
- Designed for use with Medem systems
Education
There is legislation and design standards based around gas safety for education buildings, these include the use of gas pressure proving for teaching spaces and gas detection for areas of plant/boiler rooms.
Related Products
AGDS-2em v2 Single or Two Channel Gas Detection System with Valve Control
- Designed for Boiler Rooms
- 2 Channel Gas detection system
- Valve isolation
AGDS-V Four Channel Gas Detection System with Valve Isolation
- Designed for Boiler Rooms
- 4 Channel Gas detection system
- Programmable relays
AGDS-MC v2 Sixteen channel Gas Detection System with Valve Isolation
- Designed for Boiler Rooms
- 16 Channel Gas detection system
- Valve isolation
- Event log
SEC-B v5 Gas Proving and Detection system
- Designed for Boiler Rooms
- Combined gas detection and pressure proving system
- Automatically resets after a power failure or fire alarm
- Reduces the potential for site down time and frozen pipes
Commercial
Monitoring for a gas leak with valve isolation is used as way of reducing identifiable risks. It is seen as a measure to help confirm the integrity of the installation and if a leak is detected to isolate the gas valve to prevent continual gas escape and to instigate an investigation and repair.
Related Products
AGDS-2em v2 Single or Two Channel Gas Detection System with Valve Control
- Designed for Boiler Rooms
- 2 Channel Gas detection system
- Valve isolation
AGDS-MC v2 Sixteen channel Gas Detection System with Valve Isolation
- Designed for Boiler Rooms
- 16 Channel Gas detection system
- Valve isolation
- Event log
SEC-B v5 Gas Proving and Detection system
- Designed for Boiler Rooms
- Combined gas detection and pressure proving system
- Automatically resets after a power failure or fire alarm
- Reduces the potential for site down time and frozen pipes
GPPS-evo v4 Laboratory Gas Pressure Proving System
- Designed for Laboratories
- Gas pressure proving
- Optional CO2 detection