Chlorine (Cl) Archives - Medem UK Ltd. https://medem.co.uk/product-tag/chlorine-detection/ Leading supplier and Manufacturer of Gas Detection equipment. Thu, 26 Jan 2023 14:55:12 +0000 en-GB hourly 1 https://wordpress.org/?v=6.4.3 https://medem.co.uk/wp-content/uploads/2018/10/cropped-Favacon-1-32x32.png Chlorine (Cl) Archives - Medem UK Ltd. https://medem.co.uk/product-tag/chlorine-detection/ 32 32 Pro-Elite https://medem.co.uk/product/pro-elite/ Tue, 16 Mar 2021 08:17:44 +0000 https://medem.co.uk/?post_type=product&p=38077 The Pro-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Universities, multi-room gas monitoring, car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the Pro-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The Pro-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

The post Pro-Elite appeared first on Medem UK Ltd..

]]>
< Modular <
> Programmable <
> 1 to 32 detectors <
> Multiple different gas types <
> Optional Battery Backup <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ Pro-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post Pro-Elite appeared first on Medem UK Ltd..

]]> SEC-elite https://medem.co.uk/product/sec-elite/ Sun, 17 Feb 2019 21:25:36 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=907 The SEC-elite is a programmable multi-line gas proving and detection system capable of pressure proving 4 gas lines and monitoring up to 8 detectors from a single panel.

With each gas line controlled individually, laboratories with multiple gas lines no longer need several panels installed. This reduces installation and purchase costs and creates a simple interaction for the user, which is aided by hidden until lit switches.

Detection of exotic gases can also be monitored.

All features of the system can be enabled during the initial installation, or they can be introduced at a later date, thereby providing a unique level of future-proofing.

Service Isolation
Isolation control of electrics, water valves and non-proving gas valves can also be achieved.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

The post SEC-elite appeared first on Medem UK Ltd..

]]> > Patented method of gas proving <
> Multi-line gas proving <
> Low and high incoming gas pressure monitoring <
> 1 to 8 Detectors <
> Engineer Functions <
> Fan Interlocking <
> Water & Electric isolation <
> Selectable relay options <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel and each extender (one per panel). Each relay panel had eight programmable relays.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ SEC-elite | Product and Installation Guide


Related Standards
 > UP11
>BB80
>UP1
>UP2


Talking Points
 > Individual laboratory control?

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post SEC-elite appeared first on Medem UK Ltd..

]]> AGDS-elite https://medem.co.uk/product/agds-elite/ Fri, 08 Feb 2019 12:03:42 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=699 The AGDS-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors (with the use of extension panels) for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the AGDS-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The AGDS-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

Download the catalogue:


⤓ AGDS-elite | Short Catalogue

 

 

The post AGDS-elite appeared first on Medem UK Ltd..

]]> > Modular <
> Programmable <
> 1 to 32 detectors <
> Eleven different gas types <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (90 days of detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel and each extender (one per panel). Each relay panel had eight programmable relays.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ AGDS-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post AGDS-elite appeared first on Medem UK Ltd..

]]>