Gas Detection with Valve control Archives - Medem UK Ltd. https://medem.co.uk/product-category/boiler-rooms/gas-detection-with-valve-control-boiler-rooms/ Leading supplier and Manufacturer of Gas Detection equipment. Wed, 04 Aug 2021 10:36:15 +0000 en-GB hourly 1 https://wordpress.org/?v=6.4.3 https://medem.co.uk/wp-content/uploads/2018/10/cropped-Favacon-1-32x32.png Gas Detection with Valve control Archives - Medem UK Ltd. https://medem.co.uk/product-category/boiler-rooms/gas-detection-with-valve-control-boiler-rooms/ 32 32 AGDS-2 EM v2 https://medem.co.uk/product/agds-2-em-v2/ Tue, 08 Dec 2020 10:07:30 +0000 https://medem.co.uk/?post_type=product&p=29616 The AGDS-2em V2 is a single or two-channel gas detection system with valve isolation. Up to 2 low voltage sensors can be connected for the detection of natural gas, LPG or carbon monoxide.

Panel controls include an ‘Emergency Stop’, ‘Mute’ and ‘Reset’ buttons.

In the event of a high alarm from one of the sensors, the system will isolate a connected control valve. A low alarm indication is also given.Separate terminals and LED’s for ‘EM Stop’ and ‘Fire Alarm’ circuits provide clearer indication when activated.Settable change over mains rated relay can be used to activate a beacon/sounder, remote indication or signal to a BMS system.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-2 EM v2 appeared first on Medem UK Ltd..

]]> > Compact <
> 1 to 2 detectors <
> Three different gas types <
> Simple to install <
> Latching high alarm (Adjustable time to latch) <
> EM Stop, Fire Alarm and thermal link monitoring <
> Panel mounted Emergency Stop Button <
> Settable mains rated relay for use with BMS systems or remote indicators <

 


Product and Installation Guides
⤓ AGDS-2 V2EM | Product and Installation Guide


Related Standards
 > BB100

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-2 EM v2 appeared first on Medem UK Ltd..

]]> AGDS-MC v2 https://medem.co.uk/product/agds-mc/ Wed, 20 Feb 2019 00:49:42 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=981 The AGDS-MC v2 is a multi-channel gas detection system designed for use in boiler houses.

Six Medem detectors can be connected (16 with a power pack) for the detection of natural gas, LPG, or carbon monoxide, carbon dioxide and oxygen depletion.

In the event of a high alarm from one of the detectors, the system will isolate a connected control valve. Low alarm indication is also given.

Even with the system switched off It can still be used to monitor for carbon monoxide and carbon dioxide via its 0-10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or switch ventilation on via a relay.

The OLED will display appropriate information about alarm situations and detector status.

There are multiple relays which can be used to control remote indications, connect to a BMS system or activate a fan.

See the AGDS-MCM panel for a 'non-latching' version which can be used for the control of ventilation systems i.e. indoor car parks on CO detection.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-MC v2 appeared first on Medem UK Ltd..

]]> > 1 to 16 detectors <
> Five different gas types <
> Multiple Relay signalling options <
> Clear OLED display <
> Fan Interlock <

Settable mains and SELV rated relays for BMS, beacon or fan activation from one of the following statuses:
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-MC v2 | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-MC v2 appeared first on Medem UK Ltd..

]]> AGDS-4 https://medem.co.uk/product/agds-4/ Wed, 20 Feb 2019 00:49:01 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=980 The AGDS-4 is a four-channel gas detection system designed for use in boiler houses and plant rooms. Up to 4 low voltage sensors for the detection of natural gas, LPG or carbon monoxide can be connected to the panel.

In the event of a high alarm from one of the sensors, the system will isolate/close any connected valve. A low alarm indication is also given.

Remote emergency stop buttons can be fitted and a fire alarm connected to close the gas valve when activated.

Two change over relays for remote indications or connection to a BMS system.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-4 appeared first on Medem UK Ltd..

]]>  > Compact <
> 1 to 4 addressable detectors <
> Quick to install <
> Settable SELV relay (Low Alarm, Detector Alert, EM stop & Gas On conditions) <
> Latching high alarm. (Adjustable time to latch) <
> EM stop, Fire Alarm and thermal link monitoring <

Panel mounted Emergency Stop Button.
High alarm relay for use with BMS systems or remote indicators.

 


Product and Installation Guides
⤓ AGDS-4 | Product and Installation Guide


Related Standards
 > BB100

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-4 appeared first on Medem UK Ltd..

]]> SEC-B https://medem.co.uk/product/sec-b/ Tue, 19 Feb 2019 20:59:10 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=967 The SEC-B is a multi-function solution designed for boiler rooms.

Gas Pressure Proving
Using the patented differential pressure proving method the system checks the gas pipework and appliances in a kitchen for gas leaks. It also monitors for low pressure and overpressure without opening the solenoid valve, making it the only truly safe method of proving available.

Auto-restart after power failure and fire alarm
The SEC-B can auto reset after an electricity supply failure or after a fire alarm has been manually reset when used in boiler room applications. This enables a building heating system to restart without manual intervention, minimising the chance of frozen pipes and a cold building.

Features and Details:

  • Gas proving
  • Gas detection
  • Electrical isolation
  • Auto-restart after power failure
  • Auto-restart after a fire alarm reset


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post SEC-B appeared first on Medem UK Ltd..

]]> > Patented method of gas proving <
> Low and high incoming gas pressure monitoring <
> 1 to 16 Detectors <
> Auto Restart on Power Failure <
> Auto Restart on Fire Alarm <
> Engineer Functions <
> Fan Interlocking <
> Fire Test Isolation Mode <
> Two Settable SELV relays with thirteen possible options <

 

The fail-safe gas valve and relay checking, fire alarm and time delay auto restarts are just some of the new developments making Medem systems continue to be the most reliable, safest and flexible available today.

 

 


Product and Installation Guides
⤓ SEC-B | Product and Installation Guide

 


Related Standards
 > UP11
>BB80
>UP1
>UP2

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post SEC-B appeared first on Medem UK Ltd..

]]> AGDS-V https://medem.co.uk/product/agds-v/ Tue, 19 Feb 2019 20:57:31 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=969 The AGDS-V is a four channel gas detection system designed for use in boiler houses, plant rooms and areas with a risk of gas escape or build up.

In the event of a high alarm from one of the sensors, the AGDS-V will isolate/close any connected solenoid valve.

A low alarm indication is given on the control panel including 'Mute', 'Reset' and Emergency Stop buttons. Remote emergency stop buttons and thermal links can be monitored and there is also a fire alarm input which will close the gas valve when activated. There are two change over mains rated relays which can be used to activate a beacon/sounder, a fan or signal to a BMS system.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-V appeared first on Medem UK Ltd..

]]> > Compact <
> 1 to 4 detectors <
> Five different gas detector types <
> Simple to install <
> Two settable mains rated relays <
> Clear OLED display <

Two settable mains rated relays for BMS, beacon or fan activation
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-V | Product and Installation Guide


Related Standards
 > BB100

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post AGDS-V appeared first on Medem UK Ltd..

]]> SafeSpace V https://medem.co.uk/product/safespace-v/ Tue, 19 Feb 2019 14:19:08 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=956 The SafeSpace V is a gas detection system which can monitor the atmosphere for CH4, LPG, CO, CO2 and Oxygen Depletion when fitted with the appropriate Medem detectors.

Available as:

  • Fan interlocking for monitoring sites relying on mechanical ventilation.
  • Detection levels displayed simply on the easy to read OLED screen.
  • There is an internal toner fitted as standard, additional sounders, beacons and a BMS can also be connected and activated via the internal option relay.
  • Thermal links, remote EM stop buttons and a fire alarm input can all be monitored.

Features and Details:

  • With Valve Isolation


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

The post SafeSpace V appeared first on Medem UK Ltd..

]]> > Compact <
> 1 to 4 detectors <
> Five different gas types <
> Fan Interlock <
> Settable SELV relay (Low/High Alarm, Detector Alert, EM stop & Gas On conditions) <
> Clear OLED display <

 


Product and Installation Guides
⤓ SafeSpace V | Product and Installation Guide


Related Standards
 > BB100

 

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post SafeSpace V appeared first on Medem UK Ltd..

]]>