AGDS-MC v2

The AGDS-MC v2 is a multi-channel gas detection system designed for use in boiler houses.

Six Medem detectors can be connected (16 with a power pack) for the detection of natural gas, LPG, or carbon monoxide, carbon dioxide and oxygen depletion.

In the event of a high alarm from one of the detectors, the system will isolate a connected control valve. Low alarm indication is also given.

Even with the system switched off It can still be used to monitor for carbon monoxide and carbon dioxide via its 0-10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or switch ventilation on via a relay.

The OLED will display appropriate information about alarm situations and detector status.

There are multiple relays which can be used to control remote indications, connect to a BMS system or activate a fan.

See the AGDS-MCM panel for a ‘non-latching’ version which can be used for the control of ventilation systems i.e. indoor car parks on CO detection.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we’ll be more than happy to help.

 

Description

> 1 to 16 detectors <
> Five different gas types <
> Multiple Relay signalling options <
> Clear OLED display <
> Fan Interlock <

Settable mains and SELV rated relays for BMS, beacon or fan activation from one of the following statuses:
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-MC v2 | Product and Installation Guide

 


All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

Additional information

Product Dimensions

255mm x 180mm x 60mm

Gas Detection

The panel can monitor up to 6 detectors directly and up to 16 when installed with an AD-PP power pack. The current range is:
Methane/Natural Gas (CH4), Propane (C3H8), Carbon Monoxide (CO) Carbon Dioxide (CO2) and Oxygen (O2) Depletion

Alarm Types

Fixed low and high alarm peak levels, high alarm activation will latch and isolate the connected gas valve.

Peak Alarms

Methane/Natural Gas (CH4) & Propane (C3H8)
• 5% low alarm
• 10% high alarm

Carbon Monoxide (CO)
• 20PPM Low Alarm
• 30PPM High Alarm

Carbon Dioxide (CO2)
• 1500PPM High Alarm
• 2200PPM High Alarm
• 2800PPM High Alarm
• 5000PPM High Alarm

Oxygen (O2) Depletion
• 19.5% Pre Alarm
• 18% Full Alarm

Warranty

Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of our products.

This applies to the main panel; gas detectors carry a two-year warranty.

Where we commission an installed system the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

Service

The panel and sensors must be re-commissioned and tested every 12 months as a minimum but with consideration of every 6 months dependant on gas type and environment.

Medem offers cost-effective yearly service plan options which include detector exchange to assist in service budgeting.

TOP