Carbon Dioxide (CO2) Archives - Medem UK Ltd. https://medem.co.uk/product-tag/carbon-dioxide-detection/ Leading supplier and Manufacturer of Gas Detection equipment. Thu, 26 Jan 2023 14:55:12 +0000 en-GB hourly 1 https://wordpress.org/?v=6.4.3 https://medem.co.uk/wp-content/uploads/2018/10/cropped-Favacon-1-32x32.png Carbon Dioxide (CO2) Archives - Medem UK Ltd. https://medem.co.uk/product-tag/carbon-dioxide-detection/ 32 32 Pro-Elite https://medem.co.uk/product/pro-elite/ Tue, 16 Mar 2021 08:17:44 +0000 https://medem.co.uk/?post_type=product&p=38077 The Pro-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Universities, multi-room gas monitoring, car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the Pro-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The Pro-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

The post Pro-Elite appeared first on Medem UK Ltd..

]]>
< Modular <
> Programmable <
> 1 to 32 detectors <
> Multiple different gas types <
> Optional Battery Backup <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ Pro-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post Pro-Elite appeared first on Medem UK Ltd..

]]> AGDS-MCM v2 https://medem.co.uk/product/agds-mcm-v2/ Wed, 17 Apr 2019 17:12:27 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=1702 The AGDS-MCM is a multi-channel gas monitoring system designed for use in areas of potential gas escape and build-up.

Six Medem detectors can be connected (16 with a power pack) for the detection of natural gas, LPG, or carbon monoxide, carbon dioxide and oxygen depletion.
In the event of a high alarm from one of the detectors, the system can activate a relay, beacon or sounder. Low alarm indication is also given.

Even with the system switched off it can still be used to monitor for carbon monoxide and carbon dioxide via its 0-10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or switch ventilation on via a relay.

The OLED will display appropriate information about alarm situations and detector status.

There are multiple relays which can be used to control remote indications, connect to a BMS system or activate a fan.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-MCM v2 appeared first on Medem UK Ltd..

]]> > 1 to 16 detectors <
> Five different gas types <
> Multiple Relay signalling options <
> Clear OLED display <
> Fan Interlock <

Settable mains and SELV rated relays for BMS, beacon or fan activation from one of the following statuses:
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-MCM | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-MCM v2 appeared first on Medem UK Ltd..

]]> VGPS-evo https://medem.co.uk/product/vgps-evo/ Wed, 20 Feb 2019 00:52:00 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=982 The VGPS-evo offers ventilation interlocking, gas pressure proving and environmental monitoring in a single panel for use within commercial kitchens helping them meet the requirements of BS 6173:2009 and IGEM/UP19.

Very easy to use, the LCD displays clear messages giving real information rather than just LED indications.

Medem gas detectors can be used to monitor the carbon dioxide level to ensure that HSE set levels are not exceeded.

Engineer functions can be used to aid in the setup of the system –displaying real-time inlet and outlet pressure at the gas valve (mbar) Valve lift button, it’s with functions like these that for example a 'valve let by indication' check be performed with ease.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post VGPS-evo appeared first on Medem UK Ltd..

]]> > Gas Pressure Proving <
> Ventilation Interlock <
> Carbon Dioxide Level Monitoring <
> Carbon Monoxide Detection <
> Engineer Functions <
> Over Pressure Alert <

The fail-safe gas valve and relay checking are just some of the new developments making Medem systems continue to be the most reliable, safest and flexible available today.

 


Product and Installation Guides
⤓ VGPS-evo | Product and Installation Guide


Related Standards
> BS6173
> UP19

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post VGPS-evo appeared first on Medem UK Ltd..

]]> GPPS-evo https://medem.co.uk/product/gpps-evo/ Wed, 20 Feb 2019 00:47:31 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=978 The GPPS-evo is a laboratory gas pressure proving system with the ability to monitor up to four gas sensors.

The gas pressure proving is by Medem’s patented method of dynamically measuring the pressure differential across the solenoid valve when performing a downstream integrity check. This method stops nuisance tripping of the gas supply. The addition of the LCD makes this system very easy to use providing clear messages giving real information rather than just LED indications.

Flexibility
The GPPS-evo is designed to perform a downstream integrity check of pipework and appliances which could be left open to atmosphere, such as a laboratory.

In-line with the updated legislation of BB101 and IGEM/UP11/Edition 3 the system can also monitor the CO2 level when fitted with a Medem detector displaying the PPM.

CO2 is considered a primary indicator of air quality, with the latest legislation setting maximum limits for levels within educational facilities.

Carbon Monoxide, Natural Gas and Oxygen depletion detectors can also be monitored.

An auto-stop timer is incorporated to help prevent unauthorised use of the gas out-of-hours.

There are several 'engineer functions' which can be used to aid in the set-up of the system.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post GPPS-evo appeared first on Medem UK Ltd..

]]> > Patented method of gas proving <
> Low and high incoming gas pressure monitoring <
> 1 to 4 detectors <
> CO2 displayed as a ppm on the LCD <
> Engineer functions <

A let by and a dynamic pressure loss reading can be viewed by the engineer using the push buttons on the circuit board or facia ‘Power’ button. The dynamic gas pressure readouts displayed on the LCD indicating the pressure on both sides of the valve.

The carbon dioxide PPM levels can be seen by pressing the ‘Alert’ button on the panel fascia.

 


Product and Installation Guides
⤓ GPPS-evo | Product and Installation Guide


Related Standards
 > UP11
> BB80

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post GPPS-evo appeared first on Medem UK Ltd..

]]> AGDS-M https://medem.co.uk/product/agds-m/ Tue, 19 Feb 2019 23:50:19 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=973 The AGDS-M is a four channel gas detection system designed for environmental monitoring within boiler rooms, cellars, gas stores and areas with a risk of gas escape or build-up.

A low alarm indication is given on the control panel including 'Mute', 'Reset'. There are two change over mains rated relays which can be used to activate a beacon/sounder, a fan or signal to a BMS system.

Each relay is able to be set to report one of the below statuses:

  • Low Alarm
  • High Alarm
  • Detector Fault
  • Generic Alarm


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-M appeared first on Medem UK Ltd..

]]> > Low Alarm <
> > Compact <
> 1 to 4 detectors <
> Five different gas detector types <
> Simple to install <
> Two settable mains rated relays <
> Clear OLED display <

Two settable mains rated relays for BMS, beacon or fan activation.
Low Alarm • High Alarm • Detector Fault • Generic Alarm.

 


Product and Installation Guides
⤓ AGDS-M | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post AGDS-M appeared first on Medem UK Ltd..

]]> SEC-L https://medem.co.uk/product/sec-l/ Tue, 19 Feb 2019 20:56:56 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=968 The SEC-L is a multi-function solution designed for the laboratory.

Providing the operator individual control of the Gas, Water and bench electric supplies.

Featuring Medem’s patented differential pressure proving method it can pressure prove a variety of gas delivery lines including oxygen up to 10bar. Overpressure can also be monitored and reported on the LCD display.

The SEC-L can monitor the carbon dioxide level and temperature to control area ventilation in the laboratory when fitted with appropriate sensors.

Where the CO2 level rises above prescribed limits, the system can isolate a gas supply to help meet the updated BB101 and IGEM/UP11, edition 3. The limit is variable to accommodate for current legislation and guidance.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post SEC-L appeared first on Medem UK Ltd..

]]> > Gas Pressure Proving <
> Ventilation Interlock <
> Carbon Dioxide Level Monitoring <
> Demand Controlled Ventilation <
> Fire Test Isolation Control Built-in <
> Electrical & Water Isolation <
> Engineer Functions <
> Fan interlocking <
> Fire Test Isolation Mode <
> Over Pressure Alert <

The fail-safe gas valve and relay checking, fire alarm and time delay auto restarts are just some of the new developments making Medem systems continue to be the most reliable, safest and flexible available today.

 


Product and Installation Guides
⤓ SEC-L | Product and Installation Guide


Related Standards
 > UP11
> BB80

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post SEC-L appeared first on Medem UK Ltd..

]]> SEC-K https://medem.co.uk/product/sec-k/ Tue, 19 Feb 2019 20:53:05 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=966 The SEC-K is a ventilation interlock and gas proving system for commercial kitchens with multiple in-built features which can be used where and when required to help sites meet BS6173/2009 & IGEM UP19.

The recently updated V4 system can monitor for carbon monoxide (CO) and carbon dioxide (CO2) out-of-hours so even when the panel is switched off an alarm can be raised, or ventilation switched on. This provides additional safety monitoring particularly if solid fuel appliances are installed within the kitchen.

Gas proving must be fitted in any commercial kitchen which has appliances fitted without flame failure devices (FFD’s). As explained further in the article “why fit gas pressure proving in a commercial kitchen?” gas proving should be considered for the long-term benefit and safety of the site when considering other gas standards and that the majority of leaks identified are before the FFD’s.

Demand-controlled ventilation fail-safe gas valve and relay checking are just some of the new developments making Medem systems continue to be the most reliable, safest and flexible available today.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post SEC-K appeared first on Medem UK Ltd..

]]> > Gas Pressure Proving <
> Ventilation Interlock <
> Carbon Dioxide Level Monitoring <
> Carbon Monoxide Detection <
> Demand Controlled Ventilation <
> Fire Test Isolation Control Built-in <
> Out-of-hours CO Monitoring and Alarm <
> Electrical Isolation <
> Engineer Functions <
> Fan interlocking <
> Fire Test Isolation Mode <
> Over Pressure Alert <

Settable relays for BMS, beacon or fan activation.

Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ SEC-K | Product and Installation Guide


Related Standards
 > BS6173
> UP19

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post SEC-K appeared first on Medem UK Ltd..

]]> AGDS-elite https://medem.co.uk/product/agds-elite/ Fri, 08 Feb 2019 12:03:42 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=699 The AGDS-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors (with the use of extension panels) for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the AGDS-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The AGDS-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

Download the catalogue:


⤓ AGDS-elite | Short Catalogue

 

 

The post AGDS-elite appeared first on Medem UK Ltd..

]]> > Modular <
> Programmable <
> 1 to 32 detectors <
> Eleven different gas types <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (90 days of detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel and each extender (one per panel). Each relay panel had eight programmable relays.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ AGDS-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post AGDS-elite appeared first on Medem UK Ltd..

]]>