Gas Detection & Monitoring Archives - Medem UK Ltd. https://medem.co.uk/product-category/gas-detection-monitoring/ Leading supplier and Manufacturer of Gas Detection equipment. Thu, 26 Jan 2023 14:55:12 +0000 en-GB hourly 1 https://wordpress.org/?v=6.4.3 https://medem.co.uk/wp-content/uploads/2018/10/cropped-Favacon-1-32x32.png Gas Detection & Monitoring Archives - Medem UK Ltd. https://medem.co.uk/product-category/gas-detection-monitoring/ 32 32 Pro-Elite https://medem.co.uk/product/pro-elite/ Tue, 16 Mar 2021 08:17:44 +0000 https://medem.co.uk/?post_type=product&p=38077 The Pro-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.

Universities, multi-room gas monitoring, car parks, battery stores, battery charging rooms, food processing, agricultural buildings, banks and secure buildings are all examples of where the Pro-elite has been installed to provide a comprehensive level of gas detection.

Flexibility
The Pro-elite has been designed to be as flexible as possible, whether it’s a simple installation requiring just one detector or a large distributed system with a mix of gas detector types, alarm settings and remote indications. The system will be preconfigured before supply and require fully commissioning by Medem engineers.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

The post Pro-Elite appeared first on Medem UK Ltd..

]]>
< Modular <
> Programmable <
> 1 to 32 detectors <
> Multiple different gas types <
> Optional Battery Backup <
> Optional programmable relay panels. (Low/High Alarms & Fault conditions) <
> Peak or Time weight average (TWA) alarms. (Programmable to your requirements) <
> Latching or Non-Latching. (Adjustable time to latch) <
> Detector and event log. (detector history for analysis) <

Optional programmable relay panels for use with BMS systems or remote indicators
Optional relay panels can be connected to the main panel.
Depending on the number of detectors and relay panels connected each detector could have one relay set to indicate status (either high, low or fault), or could have multiple relays set to indicate multiple conditions. There is also a “double knock” relay to indicate if any two detectors on this panel (main or extender) enter a high alarm state.

 


Product and Installation Guides
⤓ Pro-elite | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post Pro-Elite appeared first on Medem UK Ltd..

]]> AGDS-2 EM v2 https://medem.co.uk/product/agds-2-em-v2/ Tue, 08 Dec 2020 10:07:30 +0000 https://medem.co.uk/?post_type=product&p=29616 The AGDS-2em V2 is a single or two-channel gas detection system with valve isolation. Up to 2 low voltage sensors can be connected for the detection of natural gas, LPG or carbon monoxide.

Panel controls include an ‘Emergency Stop’, ‘Mute’ and ‘Reset’ buttons.

In the event of a high alarm from one of the sensors, the system will isolate a connected control valve. A low alarm indication is also given.Separate terminals and LED’s for ‘EM Stop’ and ‘Fire Alarm’ circuits provide clearer indication when activated.Settable change over mains rated relay can be used to activate a beacon/sounder, remote indication or signal to a BMS system.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-2 EM v2 appeared first on Medem UK Ltd..

]]> > Compact <
> 1 to 2 detectors <
> Three different gas types <
> Simple to install <
> Latching high alarm (Adjustable time to latch) <
> EM Stop, Fire Alarm and thermal link monitoring <
> Panel mounted Emergency Stop Button <
> Settable mains rated relay for use with BMS systems or remote indicators <

 


Product and Installation Guides
⤓ AGDS-2 V2EM | Product and Installation Guide


Related Standards
 > BB100

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-2 EM v2 appeared first on Medem UK Ltd..

]]> AGDS-MCM v2 https://medem.co.uk/product/agds-mcm-v2/ Wed, 17 Apr 2019 17:12:27 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=1702 The AGDS-MCM is a multi-channel gas monitoring system designed for use in areas of potential gas escape and build-up.

Six Medem detectors can be connected (16 with a power pack) for the detection of natural gas, LPG, or carbon monoxide, carbon dioxide and oxygen depletion.
In the event of a high alarm from one of the detectors, the system can activate a relay, beacon or sounder. Low alarm indication is also given.

Even with the system switched off it can still be used to monitor for carbon monoxide and carbon dioxide via its 0-10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or switch ventilation on via a relay.

The OLED will display appropriate information about alarm situations and detector status.

There are multiple relays which can be used to control remote indications, connect to a BMS system or activate a fan.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-MCM v2 appeared first on Medem UK Ltd..

]]> > 1 to 16 detectors <
> Five different gas types <
> Multiple Relay signalling options <
> Clear OLED display <
> Fan Interlock <

Settable mains and SELV rated relays for BMS, beacon or fan activation from one of the following statuses:
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-MCM | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-MCM v2 appeared first on Medem UK Ltd..

]]> BGP-Y https://medem.co.uk/product/remote-emergency-stop-buttons/ Wed, 20 Feb 2019 12:21:48 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=1006 Remote stop buttons supplied by Medem.

Remote Stop Buttons can be installed with all our systems for convenience and safety. To find out more about the product please download the 'EM-Stop Wiring details'.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post BGP-Y appeared first on Medem UK Ltd..

]]>  


Product and Installation Guides
⤓ EM-Stop | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post BGP-Y appeared first on Medem UK Ltd..

]]> SIP-1 https://medem.co.uk/product/sip-1/ Wed, 20 Feb 2019 12:14:16 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=1005 The SIP-1 is a service isolation panel made by Medem.

It provides key operated control for switching and isolation and available for Gas, Water, Oil and Electric control.

Features and Details:

  • Panel mount emergency stop and removable key.
  • Two mains rated (5 amp max) relays which change state in conjunction with the key switch.
  • A 12-volt output and provision for additional remote emergency stop buttons where required.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post SIP-1 appeared first on Medem UK Ltd..

]]> > Compact <
> Gas Isolation <
> Service Isolation <

 


Product and Installation Guides
⤓ SIP-1 | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post SIP-1 appeared first on Medem UK Ltd..

]]> AGDS-MC v2 https://medem.co.uk/product/agds-mc/ Wed, 20 Feb 2019 00:49:42 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=981 The AGDS-MC v2 is a multi-channel gas detection system designed for use in boiler houses.

Six Medem detectors can be connected (16 with a power pack) for the detection of natural gas, LPG, or carbon monoxide, carbon dioxide and oxygen depletion.

In the event of a high alarm from one of the detectors, the system will isolate a connected control valve. Low alarm indication is also given.

Even with the system switched off It can still be used to monitor for carbon monoxide and carbon dioxide via its 0-10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or switch ventilation on via a relay.

The OLED will display appropriate information about alarm situations and detector status.

There are multiple relays which can be used to control remote indications, connect to a BMS system or activate a fan.

See the AGDS-MCM panel for a 'non-latching' version which can be used for the control of ventilation systems i.e. indoor car parks on CO detection.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-MC v2 appeared first on Medem UK Ltd..

]]> > 1 to 16 detectors <
> Five different gas types <
> Multiple Relay signalling options <
> Clear OLED display <
> Fan Interlock <

Settable mains and SELV rated relays for BMS, beacon or fan activation from one of the following statuses:
Low Alarm • High Alarm • Emergency Stop • Gas On/Off • Fire Panel Activated • Detector Fault • Generic Alarm

 


Product and Installation Guides
⤓ AGDS-MC v2 | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-MC v2 appeared first on Medem UK Ltd..

]]> AGDS-4 https://medem.co.uk/product/agds-4/ Wed, 20 Feb 2019 00:49:01 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=980 The AGDS-4 is a four-channel gas detection system designed for use in boiler houses and plant rooms. Up to 4 low voltage sensors for the detection of natural gas, LPG or carbon monoxide can be connected to the panel.

In the event of a high alarm from one of the sensors, the system will isolate/close any connected valve. A low alarm indication is also given.

Remote emergency stop buttons can be fitted and a fire alarm connected to close the gas valve when activated.

Two change over relays for remote indications or connection to a BMS system.


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-4 appeared first on Medem UK Ltd..

]]>  > Compact <
> 1 to 4 addressable detectors <
> Quick to install <
> Settable SELV relay (Low Alarm, Detector Alert, EM stop & Gas On conditions) <
> Latching high alarm. (Adjustable time to latch) <
> EM stop, Fire Alarm and thermal link monitoring <

Panel mounted Emergency Stop Button.
High alarm relay for use with BMS systems or remote indicators.

 


Product and Installation Guides
⤓ AGDS-4 | Product and Installation Guide


Related Standards
 > BB100

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

The post AGDS-4 appeared first on Medem UK Ltd..

]]> Inair CO2 Monitoring https://medem.co.uk/product/inair-co2-monitoring/ Wed, 20 Feb 2019 00:45:59 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=976 Medem Inair is the only CO2 monitoring system capable of displaying the minimum, maximum and average CO2 levels in a classroom (patent applied for).

CO2 is considered the primary indicator of indoor air quality, as high levels of CO2 have a detrimental effect on students’ cognisance. With studies showing that even moderately elevated levels of CO2 over a sustained period can significantly impair decision-making and performance.

Naturally Ventilated
A high-level alarm of 2,000ppm for 20 minutes. Daily average (8hrs) should be less than 1,500ppm.

Mechanically Ventilated
A high-level alarm of 1,500ppm for 20 minutes. Daily average (8hrs) should be less than 1,000ppm.
With a simple internal selection, the Inair can be set to monitor for these two operating levels and have the traffic light LED operate accordingly.

If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post Inair CO<sub>2</sub> Monitoring appeared first on Medem UK Ltd..

]]> > Auto calibrating<
> Averages button <
> Clear OLED display <
> Two operating levels <

High-level alarm relay for BMS signalling.

 


Product and Installation Guides
⤓ Inair | Product and Installation Guide


Related Standards
 > BB101
 > UP11

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post Inair CO<sub>2</sub> Monitoring appeared first on Medem UK Ltd..

]]> AGDS-M https://medem.co.uk/product/agds-m/ Tue, 19 Feb 2019 23:50:19 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=973 The AGDS-M is a four channel gas detection system designed for environmental monitoring within boiler rooms, cellars, gas stores and areas with a risk of gas escape or build-up.

A low alarm indication is given on the control panel including 'Mute', 'Reset'. There are two change over mains rated relays which can be used to activate a beacon/sounder, a fan or signal to a BMS system.

Each relay is able to be set to report one of the below statuses:

  • Low Alarm
  • High Alarm
  • Detector Fault
  • Generic Alarm


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post AGDS-M appeared first on Medem UK Ltd..

]]> > Low Alarm <
> > Compact <
> 1 to 4 detectors <
> Five different gas detector types <
> Simple to install <
> Two settable mains rated relays <
> Clear OLED display <

Two settable mains rated relays for BMS, beacon or fan activation.
Low Alarm • High Alarm • Detector Fault • Generic Alarm.

 


Product and Installation Guides
⤓ AGDS-M | Product and Installation Guide

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post AGDS-M appeared first on Medem UK Ltd..

]]> SEC-B https://medem.co.uk/product/sec-b/ Tue, 19 Feb 2019 20:59:10 +0000 https://medem.co.uk.gridhosted.co.uk/?post_type=product&p=967 The SEC-B is a multi-function solution designed for boiler rooms.

Gas Pressure Proving
Using the patented differential pressure proving method the system checks the gas pipework and appliances in a kitchen for gas leaks. It also monitors for low pressure and overpressure without opening the solenoid valve, making it the only truly safe method of proving available.

Auto-restart after power failure and fire alarm
The SEC-B can auto reset after an electricity supply failure or after a fire alarm has been manually reset when used in boiler room applications. This enables a building heating system to restart without manual intervention, minimising the chance of frozen pipes and a cold building.

Features and Details:

  • Gas proving
  • Gas detection
  • Electrical isolation
  • Auto-restart after power failure
  • Auto-restart after a fire alarm reset


If you require further information about this product please call us on 0161 233 0600 or email at enquiries@medem.co.uk and we'll be more than happy to help.

 

The post SEC-B appeared first on Medem UK Ltd..

]]> > Patented method of gas proving <
> Low and high incoming gas pressure monitoring <
> 1 to 16 Detectors <
> Auto Restart on Power Failure <
> Auto Restart on Fire Alarm <
> Engineer Functions <
> Fan Interlocking <
> Fire Test Isolation Mode <
> Two Settable SELV relays with thirteen possible options <

 

The fail-safe gas valve and relay checking, fire alarm and time delay auto restarts are just some of the new developments making Medem systems continue to be the most reliable, safest and flexible available today.

 

 


Product and Installation Guides
⤓ SEC-B | Product and Installation Guide

 


Related Standards
 > UP11
>BB80
>UP1
>UP2

 

All our products come with a 5-year warranty
Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of its products.
This applies to the main panels and sender units, gas detectors carry a 2-year warranty.

Why not let us install your system and receive a 10-year Warranty?
Where we’ve commissioned an installed system, the warranty is extended from five to ten years. At the time of commissioning, photos and gas pressure readings are recorded along with other relevant details of the installation. A 24-hour helpline number and the serial number is attached with the panel and all details are then entered on to the Medem database.

 

The post SEC-B appeared first on Medem UK Ltd..

]]>